What make and model of walk behind snowblower do you have.

Discussion in 'Snow Blower Forum' started by mjodrey, Oct 9, 2010.

  1. mjodrey

    mjodrey Moderator

    I have a Bolens 1026 with a 10hp Tecumseh engine.
     
  2. caseguy

    caseguy Moderator

    I moved it for you, but I see that you've already posted another one here. I'll let you decide which one you'd like to delete.
     
  3. mjodrey

    mjodrey Moderator

    Ok thanks.
     
  4. NUTNDUN

    NUTNDUN Administrator

    That is a lot of hp for a walk behind isn't it? I think the walk behind we had was only like 5 or 6 hp. It would be great to have a Bolens walk behind.
     
  5. mjodrey

    mjodrey Moderator

    You know,I hardly ever use it.I do most of my snow removal with the big Ford 4466.
     
  6. jdslednut

    jdslednut New Member

    Ariens Model Something with a POS 7HP Tecumseh on it. No matter what I do, I have to clean the carb/put in a kit almost every year. Someday I'll have a good blower on a garden tractor that I won't mind getting a little wet and dirty.
     
  7. Bolens 1000

    Bolens 1000 Moderator

    Oh yeah, Those Tecumseh carb's are a PITA...
     
  8. Bolens 1000

    Bolens 1000 Moderator

    Figured I'd give this a Bump... there must be someone else here with a walk behind Blower :D
     
  9. mjodrey

    mjodrey Moderator

    You're probably right.
     
  10. daytime dave

    daytime dave Member

    You were right. I have an Ariens 10hp 1028 model. I bought it new five or six years ago and it still starts first pull. I bought my fiance an old simplicity 7hp this summer. It also starts on the first pull and it is old.
     
  11. pulltilbroke

    pulltilbroke New Member

    I'm Sportin an Allis Chalmers Tracker 6
     
  12. caseguy

    caseguy Moderator

    That must be a pain to walk behind LOL!
     
  13. mjodrey

    mjodrey Moderator


    LOL
     
  14. Nascar3244888

    Nascar3244888 New Member

    Here is our main snowblower, it is a Troy Bilt with a 10hp Techumseh and 26" Path..
     

    Attached Files:

  15. Nascar3244888

    Nascar3244888 New Member

    Here is my newest snowblower, it needs some work, so I will most likely be needing some help on it....
     

    Attached Files:

  16. mjodrey

    mjodrey Moderator

    Good stuff Brad.:cool:
     
  17. KerryAll

    KerryAll Mt MTD blower covered and protected

    I have an old MTD blower, 10 HP (when they still rated them in HP, not CCs) and a 27" cut. Still works great, although the headlight quite after about two years (kinda like the flint lighter on a gas BBQ!).
    [​IMG]
     
  18. Bolens 1000

    Bolens 1000 Moderator

    Welcome to OPT Kerryall :)

    Be sure to visit our other forum gardentractortalk.com
     
  19. mjodrey

    mjodrey Moderator

    Ditto what Bolens 1000 said.
     
  20. NUTNDUN

    NUTNDUN Administrator

    Hi KerryAll. Welcome to OPT. Very nice snow blower you have there. It is great that you keep it covered.
     

Share This Page